WLAN Scan Tests - ScanMix2 - Functional

This automated test suite performs WLAN scan tests.

Test details

Associated requirements	Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq Device.Network.WLAN.CSBNLO.SupportNetworkListOffload Device.Network.WLAN.NLO.SupportNetworkListOffload See the device hardware requirements.
Platforms	Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86
Expected run time	~6 minutes
Categories	Certification Functional
Type	Automated

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

This test performs the following actions:

Configure two routers, that are named Router 0 and Router 1, as follows:
- Router 0 – 2.4Ghz : WPA2PSK/TKIP/B/Channel 11
- Router 0 – 5Ghz : WPA2ENTERPRISE / AES /A/Channel 36
- Router 1 – 2.4Ghz : WPA2PSK/ TKIP /G/Channel 5
- Router 1 – 5Ghz : WPA2ENTERPRISE/ AES /A/Channel 44
Perform a scan by using a public API.
Validate Router 0. Router 1 2.4 GHz and 5 GHz are available in the scan list.
Perform a scan by using a private API.
Validate router 0. Router 1 2.4 GHz and 5 GHz are available in the scan list.

Parameter	Description
TestDeviceSupports5ghz	Determines whether or not the device supports 5 GHz. Default value: True
AP1Password	The root password for the first physical access point. Default value: password
AP1IPAddress	The IP address of the WAN port of the first physical access point. Default value: 192.168.2.2
AP2Password	The root password for the second physical access point. Default value: password
AP2IPAddress	The root password for the second physical access point. Default value: 192.168.2.3
EnableTracing	Default value: No