Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This automated performs stress tests on WLAN scan, connect and disconnect, radio off and on, roaming, and sleep.
Test details
Associated requirements |
Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq Device.Network.WLAN.CSBNLO.SupportNetworkListOffload Device.Network.WLAN.NLO.SupportNetworkListOffload |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~10 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
The access point is configured with a random SSID using WPA2PSK/AES.
The following test cases are available in this test:
| Name | Description |
|---|---|
UDP |
The SUT listens for UDP traffic while the DUT sends UDP traffic. The test passes if UDP traffic is received by the SUT. |
TCP |
The SUT waits for a TCP connection. The DUT connects to the TCP session and sends data. The test passes if the data was received. |
Multicast |
The SUT sends multicast data while the DUT receives it. The test passes if multicast data was properly received. |
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.
More information
Command syntax
| Parameter | Description |
|---|---|
TestDeviceSupports5ghz |
Determines whether or not the device supports 5 GHz. Default value: True |
AP1Password |
The root password for the first physical access point. Default value: password |
AP1IPAddress |
The IP address of the WAN port of the first physical access point. Default value: 192.168.2.2 |
AP2Password |
The root password for the second physical access point. Default value: password |
AP2IPAddress |
The root password for the second physical access point. Default value: 192.168.2.3 |