Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This is the output for the Windows CE boot loader:
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Mar 5
2004 15:36:39
Microsoft Windows CE Bootloader for the Samsung SMDK2410 Version 2.4 Built Mar
5 2004
WARNING: OEMPlatformInit: Failed to initialize Smart Media.
Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 0 seconds.
Starting auto-download ...
System ready!
Preparing for download...
INFO: *** Device Name 'SMDK24101280' ***
InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 157.59.29.190
ProcessDHCP()::DHCP IP Address Resolved as 157.59.29.190, netmask: 255.255.252.0
Lease time: 259200 seconds
Got Response from DHCP server, IP address: 157.59.29.190
No ARP response in 2 seconds, assuming ownership of 157.59.29.190
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
If you press the SPACEBAR to break into the configuration menu, you see the following output:
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Mar 5
2004 15:36:39
Microsoft Windows CE Bootloader for the Samsung SMDK2410 Version 2.4 Built Mar
5 2004
WARNING: OEMPlatformInit: Failed to initialize Smart Media.
Press [ENTER] to download now or [SPACE] to cancel.
Initiating image download in 3 seconds.
Ethernet Boot Loader Configuration:
0) IP address: 0.0.0.0
1) Subnet mask: 0.0.0.0
2) DHCP: Enabled
3) Boot delay: 5 seconds
4) Reset to factory default configuration
5) Program disk image into SmartMedia card: Disabled
6) Program CS8900 MAC address
7) Low-level format the Smart Media card
D) Download image now
Enter your selection:
See Also
How to Use the BSP for the SMDK2410 Samsung MCU Development Kit
Send Feedback on this topic to the authors