Share via

Windows CE Boot Loader Output for the Renesas US7750R HARP (Aspen) SDB (Windows CE 5.0)

  • Article

Send Feedback

This is the output for the Windows CE boot loader:

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Apr 28
 2004 18:35:49
+OEMPlatformInit
Microsoft Windows CE Ethernet Bootloader 3.6 for CE/Aspen (Apr 29 2004)
Stack=8C020F70h & DipSwith =0xF
Microsoft Windows CE Ethernet Bootloader 3.6
Copyright(c) 1998,1999 Renesas Technology Corp.
+EthInit
INFO: SMC base : 0xA4400300
+SMCInit
SMC Ethernet card detected at I/O base 0xA4400300
SMC Ethernet Address: 00:30:55:01:01:45
SMC config reg val: 0000B2B1
SMC Reset complete2
-SMCInit
INFO: ReadEEPROMData...
INFO: EEPROM IpAddr 192.168.0.162 netmask 192.168.0.162
-EthInit(rc=1)
ManufactureCode=INTEL
Device Code=28F640J5
-OEMPlatformInit(rc=1)
System ready!
Preparing for download...
+EthPreDownload
INFO: Ethernet DIP switches: 0x0000000F
Platform Name:ASPEN325
Hit ENTER within 3 seconds to enter static IP address!InitDHCP():: Calling Proce
ssDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 192.168.0.99

ProcessDHCP()::DHCP IP Address Resolved as 192.168.0.99, netmask: 255.255.255.0
Lease time: 604800 seconds
Got Response from DHCP server, IP address: 192.168.0.99
No ARP response in 2 seconds, assuming ownership of 192.168.0.99
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255

If you press the SPACEBAR to break into the configuration menu, you see the following output:

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Apr 28 2004 18:35:49
+OEMPlatformInit
Microsoft Windows CE Ethernet Bootloader 3.6 for CE/Aspen (Apr 29 2004)
Stack=8C020F70h & DipSwith =0xF
Microsoft Windows CE Ethernet Bootloader 3.6
Copyright(c) 1998,1999 Renesas Technology Corp.
+EthInit
INFO: SMC base : 0xA4400300
+SMCInit
SMC Ethernet card detected at I/O base 0xA4400300
SMC Ethernet Address: 00:30:55:01:01:45
SMC config reg val: 0000B2B1
SMC Reset complete2
-SMCInit
INFO: ReadEEPROMData...
INFO: EEPROM IpAddr 192.168.0.162 netmask 192.168.0.162
-EthInit(rc=1)
ManufactureCode=INTEL
Device Code=28F640J5
-OEMPlatformInit(rc=1)
System ready!
Preparing for download...
+EthPreDownload
INFO: Ethernet DIP switches: 0x0000000F
Platform Name:ASPEN325
Hit ENTER within 3 seconds to enter static IP address!
                                                      Enter IP address, or CR for default (192.168.0.162):

See Also

How to Use the BSP for the Renesas US7750R HARP (Aspen) SDB

Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.