Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This module implements and configures the firewall for the Remote Configuration Framework.
The following table shows the configurable settings for FIREWALL.
| Value : Type | Access | Index | Description |
|---|---|---|---|
| Flags : STRING | Read-write | Handle | Specifies a set of FW_RULE_FLAGS values that are combined to specify rule flags for the firewall. |
| Mask : STRING | Read-write | Handle | Specifies a set of FW_RULE_MASKS values that are used in combination with each other to specify which fields of the FW_RULE structure are valid. |
| Description : STRING | Read-write | Handle | String that specifies the description of a firewall rule. |
| PrivateHost : STRING | Read-write | Handle | Specifies the IP address that identifies a host on the private network. |
| PrivateHostFamily : STRING | Read-write | Handle | Specifies the IP address family for a host on the private network. |
| PublicHost : STRING | Read-write | Handle | Specifies the IP address of the host on the public side of the firewall. |
| PublicHostFamily : STRING | Read-write | Handle | Specifies the IP address family for a host on the public network. |
| Protocol : STRING | Read-write | Handle | Specifies the protocol the firewall rule applies to. |
| Action : STRING | Read-write | Handle | Used for logging rules to specify whether to log packets that are blocked or packets that are allowed. |
| HourStart : STRING | Read-write | Handle | Specifies the time of day for the rule to become active, in 24-hour time. |
| HourEnd : STRING | Read-write | Handle | Specifies the time of day for the rule to become inactive, in 24-hour time. |
| DayOfWeek : STRING | Read-write | Handle | Specifies the DAY OF WEEK value for the day of the week on which the rule is active. |
| Day : STRING | Read-write | Handle | Specifies the day of the month on which the rule is active. |
| Month : STRING | Read-write | Handle | Specifies the month on which the rule is active. |
| PortMin : STRING | Read-write | Handle | Specifies the lower end of the port range for which the rule applies for TCP or UDP packets. |
| PortMax : STRING | Read-write | Handle | Specifies the upper end of the port range for which the rule applies for TCP or UDP packets. |
| Type : STRING | Read-write | Handle | Indicates that the rule applies only to ICMP packets of specified type. |
| Code : STRING | Read-write | Handle | Indicates that the rule applies only to ICMP packets with the specified code. |
| New : STRING | Read-write | Handle | Specifies a new firewall rule. |
See Also
Remote Configuration Framework Modules
Send Feedback on this topic to the authors