Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
PC Card event codes are event codes that card services sends to the stream interface driver's callback function to indicate that a PC Card event has occurred. Not all event codes are supported on all platforms. The following table shows the defined codes.
Event code | Description |
---|---|
CE_BATTERY_DEAD | Indicates a dead battery on the PC Card. This event is signaled through the BVD1 pin, which can be accessed through the pin replacement register (PRR), also. |
CE_BATTERY_LOW | Indicates a low battery on the PC Card. This event is signaled through the BVD2 pin, which can be accessed through the PRR, also. |
CE_CARD_LOCK | Indicates that the hardware card lock is closed. |
CE_CARD_READY | Indicates that a PC Card has changed from a busy to a ready state. |
CE_CARD_REMOVAL | Indicates that a PC Card has been removed from the socket. |
CE_CARD_UNLOCK | Indicates that the hardware card lock is open. |
CE_PM_SUSPEND | Indicates that the system has just returned from a suspended state and that any CE_CARD_INSERTION and CE_CARD_REMOVAL codes received before the next CE_PM_RESUME code are likely to be invalid. |
CE_PM_RESUME | Indicates that the system has resumed after being turned off and is now running. |
CE_EXCLUSIVE_COMPLETE | Indicates that a driver's CardRequestExclusive request has taken place. |
CE_EXCLUSIVE_REQUEST | Indicates that a driver has called CardRequestExclusive with a request for exclusive access to a PC Card. |
CE_WRITE_PROTECT | Indicates that a PC Card's write-protect status has changed. |
CE_CARD_INSERTION | Indicates that a PC Card has been inserted in the socket. Applications registering for insertion events also receive this event for cards that are already in the socket after a suspend event or resume event. |
CE_REGISTRATION_COMPLETE | Indicates that client registration is complete. |
See Also
PCMCIA Legacy Compatiblity Layer Reference
Send Feedback on this topic to the authors