InventMovement Class [AX 2012]

The InventMovement class is the data carrier to use when updating inventory transactions.

Syntax

class InventMovement

Run On

Called

Methods

	Method	Description
	accountBalanceAutoLossProfit	Changes an account based on the InventIssue enumeration value to the InventIssueFA enumeration value when a fixed asset is set.
	accountBalanceSheet
	accountCharge	Determines the charge ledger account.
	accountOperations
	accountOperationsAutoLossProfit
	accountPhysical
	accountPhysicalRevenue
	accountPhysicalRevenueOffset
	accountPhysicalTax
	accountStdLoss
	accountStdOffset
	accountStdProfit
	accountStockVariation	Determines the stock variation ledger account.
	activityNumber
	addRemainFinancialUnit
	addRemainPhysical
	addRemainPhysicalUnit
	adjustInventDimReservationCriteria	Adjust the inventDimCriteria for reservation.
	adjustmentMovement	Specifies whether movements are created as adjustments to previous transactions.
	adjustToFixedReceiptPrice	Returns whether a receipt should be adjusted to fixed receipt price.
	adjustTransactionInventDimEstimated	Creates an inventDim based on the movement inventDim and adjusts it as needed to be used on the estimated inventTrans.
	allowNegativePhysicalForBlockingStatus	Determines if validation should allow a negative physical available quantity for inventory status blocking.
	assemblyInventTransOriginId	Retrieves the ID of the assembly inventory transaction originator that corresponds to the movement.
	assetBookId
	assetId
	autoLossProfitInventMovVirtuel
	autoReserveQty
	batchDispReservationBlockedFieldId	Gets the field ID of the PdsDispositionMaster table for reservation blocking control field for the type of movement.
	batchExpDate
	batchProdDate
	buffer
	calcEstimatedUnit
	calculateIndirectCost	Calculates the indirect cost that is related to the movement.
	canBeAutoRepAsFinished
	canBeOnAllInventLocations	Determines whether an inventory movement can involve all related warehouses.
	canBeOnAllInventSites	Determines whether an inventory movement can involve all related sites.
	canBeOnSupermarket	Indicates whether a movement can have an InventDimId value that represents a kanban supermarket.
	canBeReserved	Indicates whether the InventMovement instance, such as a salesLine, can be reserved.
	canBeUpdatedEstimated
	canBeUpdatedFinancial
	canBeUpdatedPhysical
	canBeUpdatedPicked
	canBeUpdatedRegistered
	cancelTimeOut	Cancels a previous method call to the setTimeOut method. (Inherited from Object.)
	canChangeConsistentDim	Checks whether consistent dimensions can be modified.
	canChangeStorageConsistentDimWhenFinUpd	Specifies whether consistent storage dimensions may be changed when inventory transactions are financially updated.
	canCommittedCostBeReversed
	canCostValuebeChanged
	canHaveReservedWork	Determines if the movement type can have WHS work created that takes over reserving the lower levels of the hierarchy.
	canInventTransBeFinancialUpdated
	canInventTransBePhysicalUpdated	Verifies whether an inventory transaction can be physically updated.
	canReservationFormBeEdited
	canReservationFormBeShown
	canUpdateInventStatusBlocking	Determines if the movment can update inventory status blocking transactions
	canUpdateOnHandDatePhysicalOnReturn	Determines whether the physical date of on-hand inventory can be updated when items are returned.
	caseTagging
	checkAllowManualMarking
	checkCountingLocks
	checkDimFieldsValid	Validate that the specified inventory dimensions are valid.
	checkDimInventOwnerId_RU
	checkDimPhysical	Validates the physical dimensions of a given InventDim table buffer for the current movement.
	checkInventDimForInventDimField	Validates the physical dimensions of a given InventDim table buffer for the passed InventDim table field.
	checkInventSiteDimension	Validates the used inventory dimensions against the used financial dimensions.
	checkLocationBlocking
	checkNotOverDelivery	Verify whether the movement quantities cause overdelivery.
	checkNotSubDelivery
	checkProfileOwner_RU
	checkUpdateArrived
	checkUpdateChildReference
	checkUpdateEstimated
	checkUpdateEstimatedMovement	Indicates whether the estimated transactions value must be updated.
	checkUpdateFinancial
	checkUpdatePhysical
	checkUpdatePicked
	checkUpdateRegistered
	checkUpdateReservation	Validates the used inventory movement against an inventory update reservation.
	checkUpdateStandard
	checkWHSLoadLineInventTransConsistency	Validates that the WHSLoadLine loadlines related to the source line is in sync with the inventory transactions.
	checkWMSLocation	Checks the InventDim.WMSLocationId field of the inventory dimensions of the movement.
	childBuffer
	clearInventRefFields	Sets reference fields based on owner so that they do not reference anything.
	correctionSwapOnItem_RU	Indicates whether the correction flag should be swapped or not
	costValueChanged
	createInventTransPosting
	createOriginOwnerRelationship	Creates the relationship between the inventory transactions originator and the owner.
	createQuarantineOrder
	custVendAc
	defaultDimension
	deleteOriginOwnerRelationship	Deletes the relationship between the inventory transactions originator and the owner.
	deliveryPostalAddress	Identifies the postal delivery address of the inventory movement.
	dimAllowBlankIssue
	dimAllowBlankReceipt
	dimParmRelatedUpdate
	dirParty	Retrieves the party ID of the customer or vendor that is related to the movement.
	dlvMode
	dlvTerm
	doScrap
	doSumUp	Sums inventory transactions related to current inventory movement.
	ecoResProductDimGroupSetup	Retrieves an instance of the EcoResProductDimGroupSetup class that controls how product dimensions are configured for this movement.
	enforceSerialDimensionQuantityControl	Determines whether the movement type enforces a quantity of 1.0 for serial control.
	enteredPcsPrice
	equal	Determines whether the specified object is equal to the current one. (Inherited from Object.)
	estimatedFinancialValue
	estimatedFinancialValueSecCur_RU
	estimatedPhysicalRevenue
	estimatedPhysicalTax
	estimatedPhysicalValue	Get the estimated physical value for an inventory transaction.
	estimatedPhysicalValuePublic	Gets the estimated physical value of an inventory transaction.
	estimatedPhysicalValueSecCur_RU	Get the estimated physical value in reporting currency for an inventory transaction.
	estimatedPhysicalValueSecCurPublic_RU	Get the estimated physical value in reporting currency for an inventory transaction.
	financialIssueCostValue
	financialIssueCostValueSecCur_RU
	financialUpdateReceiptQty_IN	Gets financial update receipt qty and CW financial update receipt qty
	forceReturnLotInInventTrans_RU	Specifies whether a Return lot will be write down to the inventory transaction against a common rules.
	freightSlipType
	freightZone
	getExpiryCheckDate	Gets the date against which to check the expiry date of an inventory batch.
	getInventDimForIssueTransFromReceipt	Returns the InventDim that should be put on the issue transaction during a receipt which updates the issue transaction for WHS items.
	getInventDimForReservedTransPhysChange	Returns the InventDim that should be put on the transaction when reservation status is updated from ordered to physical.
	getModuleType_CN	Gets the value of module type.
	getQtyPreForNotOverDeliveryCheck_IN	Gets the pre-post trans Qty of current inventory transaction
	getTimeOutTimerHandle	Returns the timer handle for the object. (Inherited from Object.)
	handle	Retrieves the handle of the class of the object. (Inherited from Object.)
	hasBestBeforeDateLimit
	hasExpiryDateLimit
	hasVirtualTransactions
	initDimParmAutoReserv
	initForAutoReservation	Initializes the movement for auto reservation.
	initInventTransFinancial
	initInventTransFromBuffer
	initInventTransPhysical
	initInventTransPicked
	initWMSOrder	Initialize a WMSOrder record.
	insertChildBuffer
	interCompanyMarkingAllowed
	interCompanyMovement
	interCompanyTransaction
	inventCostIndirectFinancial	Retrieves an InventCostIndirectFinancial object.
	inventCostIndirectPhysical	Retrieves a InventCostIndirectPhysical object.
	inventdim
	inventDimGroupSetup	Retrieves an instance of the InventDimGroupSetup class that controls how inventory dimensions are configured for this movement.
	inventDimId
	inventDimIdTransferIssue	Returns an InventDimId Id for the issue transactions that corresponds to a receipt.
	inventDimMerged
	inventDimParmMatchTransferTrans	Retrieves an InventDimParm buffer which should be used when finding related InventTrans records.
	inventItemInventSetup	Retrieves an InventItemInventSetup buffer.
	inventItemOrderCheckNotStopped	Checks if the item in question is stopped in the inventory.
	inventItemOrderSetupMap	Retrieves an InventItemOrderSetupMap table map.
	inventLocationId
	inventModelGroup
	inventModelType
	inventModelTypeSecCur_RU
	inventMovSubType
	inventSiteId
	inventTable
	inventTableInvent
	inventTransOriginId	Sets or retrieves the ID of the inventory transaction originator that corresponds to the movement.
	inventTransOriginTransferId	Gets the ID of the inventory transaction originator that corresponds to the movement.
	isItemWHSEnabled	Determines if the item for this movement is enabled for using the WHS system.
	isPrimaryMovement
	isProjTransCorrection	Indicates whether the project transaction should be marked as correction or not.
	isReturned	Determines whether the movement represents a return.
	isStorageDimensionOnlyTransfer	Indicates whether the movement operates only with the storage dimensions during transfers.
	isTransfer
	isVirtuel
	itemDescription
	itemGroupId	Retrieves an item group ID of the item related to this movement.
	itemId
	itemTagging
	markingInventDimParmFixed	Fills an InventDimParm buffer with values that specify which dimensions are fixed when marking is applied.
	markingPreferPhysical	Determines whether the physically updated transactions are preferred over expected when finding transactions for marking.
	markingRefInventTransOrigin	Returns the ID of the marked transaction origin.
	mayScrapBeExpected
	mcrReserveQty	Calculates the quantity to reserve.
	mcrSetInventDeliverNow	Sets the deliver now quantity.
	mcrSetReservation	Sets the quantity to be reserved.
	mcrSetSalesDeliverNow	Sets the deliver now quantity.
	mcrUpdateDetailedStatus	Updates the sales or purchase order detailed status.
	mergeTransDimTransferReceipt
	minAllowedBestBeforeDate
	minAllowedExpiryDate
	moduleType
	mustAggregateExpectedTransactions	Determines whether the expected transactions related to this movement must be aggregated.
	mustBeAutoReserved	Determines whether the inventMovement object must be auto-reserved.
	mustBeBookedBalanceSheet
	mustBeBookedCharge	Determines if charges must be booked.
	mustBeBookedFinancially
	mustBeBookedOnhand
	mustBeBookedOnhandSecCur_RU
	mustBeBookedOperations
	mustBeBookedPhysically
	mustBeBookedPhysicalRevenue
	mustBeBookedPhysicalTax
	mustBeCostControlled
	mustBeDeducted	Determines whether model group associated with current InventMovement object requires mandatory deduct.
	mustBeExpectedAgain
	mustBePicked	Determines whether the transactions related to this movement must be picked.
	mustBeQuarantineControlled
	mustBeQuotationControlled
	mustBeReceived	Determines whether the model group associated with the current InventMovement object must be received.
	mustBeRegistered	Determines whether the transactions that are related to this movement must be registered.
	mustBeRemainControlled
	mustBeSameTransSign
	mustBeUnitControlled
	mustBeUpdatedExpected
	mustBeWMSOrderControlled
	mustCheckLocationBlocking
	mustCheckOverDelivery	Determines whether the current InventMovement object requires checking for over delivery.
	mustCheckOverDeliveryForQty	Determines whether the current InventMovement object requires checking for over delivery for the specified quantity.
	mustClearChildRef
	mustCreateQuarantineOrder
	mustDoAutoLossProfitEstimate
	mustDoAutoLossProfitFinancial
	mustDoAutoLossProfitPhysical
	mustDoProjPhysicalAdjust
	mustDoProjPhysicalPosting
	mustDoProjPosting
	mustPhysicallyUnreserveBlocking	For inventory blocking unreservation, determines whether physical inventory reservation must be removed.
	mustRegisterTrackingDimension	Determines whether the movement type supports inventory tracking
	mustReserveBasedOnMarkingOnCreation	Determines if issue transactions need to be reserved because of marking during creation.
	mustSetProjAdjRefInventTrans
	mustSetProjAdjustRefInventTrans
	mustShowMarkingWarningOnUpdate	Determines if a warning message is shown if marking cannot be updated according to dimensions.
	mustUpdateBatchAttribValues	Determines whether the movement should update the batch attributes on the related quality orders.
	mustUpdateGeneralJournal	Gets a value that indicates whether to post the inventory movement to the general journal.
	mustUpdateInventTableCostPrice	Determines whether the movement can update the cost price on the related inventtable.
	mustUpdateInventTransFields	Determines if the movement can update the fields of the related InventTrans.
	mustUpdateInventTransOriginFields
	mustUpdateRelatedTrans
	mustUseParentMovToDimTransferReceipt
	mustValidatePalletLocation	Determines if pallet location must be validated during put away for the current movement.
	needsShelfLifeCheck
	new
	newMovement_Orig
	newMovement_TransferIssue
	newMovement_TransferIssueReceive
	newMovement_TransferReceipt
	newMovement_TransferReceiptShip
	notify	Releases the hold on an object that has called the wait method on this object. (Inherited from Object.)
	notifyAll	Releases a lock on the object that was issued by the wait method on this object. (Inherited from Object.)
	objectOnServer	Determines whether the object is on a server. (Inherited from Object.)
	offsetAccountPhysical
	onlyCheckStorageDimInConsistentCheck	Specifies whether to check only storage dimensions when you verify whether consistent dimensions can be changed.
	overDeliveryPct
	owner	Returns the instance that owns the object. (Inherited from Object.)
	palletTagging
	parentMovement
	parmBurdenItem	This method gets/sets if the movement is a burden item
	parmCustomsLoadOnInventory_IN	Gets or sets the CustomsLoadOnInventory_IN parameter.
	parmCustomsLoadOnInventoryMST_IN	Gets or sets the CustomsLoadOnInventoryMST_IN parameter.
	parmDistributionLedgerPosting	Gets or sets the DistributionLedgerPosting parameter.
	parmExchangeRateDate	Gets or sets the ExchangeRateDate parameter.
	parmGoodsInRoute_RU	Gets or sets the GoodsInRoute_RU parameter.
	parmIndirectCostAmount_RU	Gets or sets the IndirectCostAmount_RU parameter.
	parmIndirectCostAmountSecCur_RU	Gets or sets the IndirectCostAmountSecCur_RU parameter.
	parmInventCostTransVarianceList	Gets or sets the InventCostTransVarianceList parameter.
	parmInventParmID_IN	Gets and sets the Parm ID of the InventTransferParmLine Table
	parmInventRefTransId_RU	Gets or sets the InventRefTransId_RU parameter.
	parmInventTransIdDelivery_RU	Gets or sets the InventTransIdDelivery_RU parameter.
	parmInventTransIdTransit_RU	Gets or sets the InventTransIdTransit_RU parameter.
	parmInventTransOriginIdRef_virtuel	Gets or sets the InventTransOriginIdRef_virtuel parameter.
	parmMarkingRefInventTransOrigin_RU	Gets or sets the MarkingRefInventTransOrigin_RU parameter.
	parmMCRInventTransRecid	Gets or sets the MCRInventTransRecid parameter.
	parmMustBeQuarantineControled	Gets or sets the MustBeQuarantineControled parameter.
	parmMustDoAutoLossProfitForbid	Gets or sets the MustDoAutoLossProfitForbid parameter.
	parmMustNotReduceForecast	Gets or sets the MustNotReduceForecast parameter.
	parmPDSBaseValue	Gets or sets the PDSBaseValue parameter.
	parmPdsBatchAttribAutoRes	Gets or sets the PdsBatchAttribAutoRes parameter.
	parmProjAdjustCorrection	Gets or sets the ProjAdjustCorrection parameter.
	parmReleasedReservationQty	Gets or sets the ReleasedReservationQty parameter.
	parmSalesPackingSlipJournalPostProj	Gets or sets the SalesPackingSlipJournalPostProj parameter.
	parmStorno_RU	Gets or sets the Storno_RU parameter.
	parmStornoPhysical_RU
	parmStornoPhysicalForced_RU	Gets or sets the StornoPhysicalForced_RU parameter.
	pdsAdjustInventoryQuantity	Adjusts the inventory quantity for the movement.
	pdsAskSameLotResolution	Requests that the user determine how to resolve a same lot reservation issue.
	pdsBaseAttributeValue	Gets the base attribute value for the current movement.
	pdsCanHaveBatchInheritance	Gets a value indicating if the movement can trigger batch inheritance.
	pdsCheckCopyBatchAttrib	Determines whether a batch attribute record exists.
	pdsCheckReserveFromDim	Determines whether the movement can be reserved from the passed dimension.
	pdsConsiderRestrictReservation	Indicates if the batch disposition functionality should be considered reservation.
	pdsCountryOfOrigin1	Gets the first country of origin.
	pdsCountryOfOrigin2	Gets the second country of origin
	pdsCWAddRemainFinancial	Adds a catch weight to the remaining financial quantity.
	pdsCWAddRemainPhysical	Adds a catch weight quantity to the remaining physical quantity.
	pdsCWAutoReserveQty	Gets the catch weight auto reserve quantity.
	pdsCWItem	This method returns true if the movement is for a catch weight item
	pdsCWQtyPost	Calculates the total received catch weight quantity after an inventory update.
	pdsCWRemainPhysical	Gets the catch weight remaining physical quantity.
	pdsCWReserveMarkMin	Indicates whether the catch weight should reserve a minimum.
	pdsCWReserveQty	Gets the catch weight reserve quantity.
	pdsCWSetRemainPhysical	Sets the catch weight remain physical quantity.
	pdsCWSetTransQty	Sets the catch weight transaction quantity.
	pdsCWTransQty	Gets the catch weight transaction quantity.
	pdsCWUnitId	Gets the catch weight unit ID.
	pdsGetBaseValue	Gets the potency base value associated with the current inventory movement.
	pdsIgnoreSerNumCtrlValidation	Indicates whether the movement should ignore the serial number control.
	pdsInheritBatchData	Inherits information to the given InventBatch based on rules for the current type of movement and the transaction data.
	pdsInitDim	Initializes the InventDim and InventDimParm records with the dimension of the movement.
	pdsMustConsiderBatchAttrib	Indicates whether the batch attributes should be considered for reservation.
	pdsOverrideFEFO	Determines whether the movement should use FEFO logic.
	pdsResolveSameLotReservation	Shows a dialog for fixing same lot reservation conflict or warns the user about existing reservation conflict.
	pdsRestrictReservation	Indicates whether to block reservation.
	pdsSameLotOverride	Overrides the same lot feature and sets it not to use this feature for this movement.
	pdsSameLotReservation	Determines whether an inventory movement should be reserved against the same inventory batch.
	pdsSameLotReservationBatch	Gets the batch the movement must be reserved against
	pdsUpdateBufferWithAdjQtyUncommited
	pdsUpdateBufferWithAdjustedQuantity	Updates the document buffer after the inventory quantity adjustment.
	pdsUseVendBatchDate	Indicates whether to use the vendor batch date.
	pdsUseVendBatchExp	Indicates whether to use the vendor expiration date.
	pdsVendBatchDate	Gets the vendor batch date.
	pdsVendBatchId	Gets the vendor batch ID.
	pdsVendBatchInfo	Gets the vendor batch details associated with this transaction.
	pdsVendExpiryDate	Gets the vendor batch expiration date.
	physicalUpdateIssueRemainQty_IN	Gets physical update remain qty and CW physical update remain qty
	physicalUpdateReceiptRemainQty_IN	Gets physical update remain qty and CW physical update remain qty
	pmfCheckUpdateInvent	Determines whether the current inventory movement can be inventory updated or not.
	pmfSetMinMaxQty	Gets a quantity based on minimum and maximum quantities from the item setup.
	postingBalanceSheet
	postingCharge	Determines the charge ledger posting type.
	postingOffsetPhysical
	postingOperations
	postingPhysical
	postingPhysicalRevenue
	postingPhysicalRevenueOffset
	postingPhysicalTax
	postingStdLoss
	postingStdOffset
	postingStdProfit
	postingStockVariation	Determines the stock variation ledger posting type.
	projAdjustRefId
	projCategoryId
	projId
	projLedgerOrigin
	projLinePropertyId
	projSalesCurrencyId
	projSalesPrice
	projTaxGroupId
	projTaxItemGroupId
	projTransactionOrigin
	projTransId
	projTransIdRef
	qtyPost
	quantityToDirection	Converts a quantity to an InventDirection object that matches the quantity.
	quotationType
	registerBlankTrackingValueAsNotReadable	Determines whether the movement type considers the registration of a blank tracking dimension value as a not readable value.
	relatedMovement
	remainFinancial
	remainFinancialUnit
	remainPhysical
	remainPhysicalUnit
	reservationHierarchyLevelStrategyList	Retrieves a list containing WHSReservationHierarchyLevelStrategy instances for this movement.
	reserveQty
	returnedSpecialCheckUpdate_RU
	returnInventTransOrigin	Identifies the original transactions.
	serialProdDate
	setInventDimId
	setInventRefFields
	setPreTransEstimated
	setProjAdjustRefId
	setRemainPhysical
	setRemainPhysicalUnit
	setTimeOut	Sets up the scheduled execution of a specified method. (Inherited from Object.)
	setTransQty
	setTransQtyUnit
	shippingDateConfirmed
	shippingDateRequested
	storno_RU
	subDeliveryPct
	toString	Returns a string that represents the current object. (Inherited from Object.)
	transChildRefId
	transChildType
	transDate
	transferDirection	Retrieves the direction of the transfer movements.
	transferInventTransOriginId	Retrieves an ID of transfer counterpart inventory transaction originator that corresponds to the movement.
	transferIssueCostPriceInventDim	For a transfer issue the inventory dimension are returned.
	transId
	transIdSum
	transIdSumTransId
	transInventRefType
	transQty
	transQtyUnit
	transRefId
	transSchedTime
	transSign
	transType
	transUnitId
	updateAutoDimLocationId
	updateAutoDimOwnerId_RU
	updateAutoEstimate
	updateAutoLossProfit
	updateAutoPhysical
	updateBuffer	Updates the movement buffer and optionally the reservation.
	updateDoBuffer
	updateGoodsInRoute_RU
	updateInheritedBatchesPostRegistration	Updates the batches created for co-products and finished goods from the ingredients, based on the rules defined for lot inheritance.
	updateLedgerAdjust
	updateLedgerAdjustSecCur_RU
	updateLedgerFinancial
	updateLedgerFinancialSecCur_RU
	updateLedgerPhysical
	updatePeggingRequirements	Updates the pegging requirements of the inventory movement.
	updateReqExplodeReservation
	updateReservation
	updateSerialNumIssue	Verifies if a particular issue inventory transaction update can be done for a particular serial number, and creates a serial number if necessary.
	updateSerialNumReceipt	Verifies if a particular receipt inventory transaction update can be done for a particular serial number, and creates a serial number if necessary.
	usageCount	Returns the current number of references, that is, the value of the reference counter, that the object has. (Inherited from Object.)
	useEnteredPriceAsCost
	viewCacheInventTransOrigin
	wait	Pauses a process. (Inherited from Object.)
	whsMustConsiderBatchProcessing	Determines if special batch processing must be used during reservation.
	whsUpdateAutoDimStatusId	For WHS controlled items with inventory status not set updates it with default value and returns true, otherwise returns false.
	wmsShipmentGroupingRefId	Retrieves the grouping reference ID to be used with output orders.
	wmsShipmentGroupingTransType	Retrieves the grouping transaction type to be used with output orders.
	xml	Returns an XML string that represents the current object. (Inherited from Object.)
	::bufferSetRemainQty	Calculates and sets remainInventPhysical on the inventMovement class if the inventMovement must be remaincontrolled.
	::bufferSetTransQty
	::bufferSetTransQtyUnit
	::canAutoReserveQuantity	Indicate whether it is possible to auto-reserve an inventory movement.
	::construct	Creates an instance of the inventMovement class.
	::constructFromArgs
	::constructNoThrow
	::constructServer
	::newReqTrans	Creates an inventMovement object by using a ReqTrans record.
	::newTransferScrapMovement	Initializes a new instance of the inventory transfer scrap movement class.
	::openInventOnhandCheckReserveForm	Opens InventOnhandCheckReserve form.
	::pdsAskSameLotResolutionClient	Requests that the user determine how to resolve a same lot reservation issue.
	::setAutoReserving	Sets and checks the auto-reserving peoperty.
	::setMinMaxQty	Checks and sets the minimum or maximum qty that is specified on the item.

Top

Remarks

Typically this class holds a buffer which could be a sales or a purchase order line or a line from an inventory journal. The InventMovement class hierarchy is closely connected to the InventUpdate class. The InventUpdate class is the engine that brings inventory transactions from one status to another and the InventMovement class is the data carrier to use when updating inventory transactions. It is important to remember the behavior of transactions and that special handling must be implemented on the InventMovement class and not be included in the InventUpdate engine, which should stay generic. The InventMovement classes are as follows:

Inheritance Hierarchy

Object Class
  InventMovement Class
    InventMov_Asset_ru Class
    InventMov_AssetIssue_RU Class
    InventMov_AssetSale_ru Class
    InventMov_Blocking Class
    InventMov_Component_JP Class
    InventMov_Journal Class
    InventMov_KanbanEmpty Class
    InventMov_KanbanJob Class
    InventMov_KanbanJobPickingList Class
    InventMov_Prod Class
    InventMov_ProdCoBy Class
    InventMov_ProdJournalRelease_RU Class
    InventMov_ProdLine Class
    InventMov_ProdReleaseTrans_RU Class
    InventMov_ProjItemTrans Class
    InventMov_Purch Class
    InventMov_PurchRFQ Class
    InventMov_PurchRFQLine Class
    InventMov_QualityOrder Class
    InventMov_Quarantine Class
    InventMov_Sales Class
    InventMov_SalesQuotation Class
    InventMov_Scrap_RU Class
    InventMov_Statement Class
    InventMov_Transfer Class
    InventMov_TransferScrap Class
    InventMov_Virtuel Class
    InventMov_WMSOrder Class
    InventMov_WMSTransport Class
    WHSInventMov_Container Class
    WHSInventMov_Quarantine Class
    WHSInventMov_Work Class