Manage data retention in a Log Analytics workspace

Article
2024-09-11

A Log Analytics workspace retains data in two states:

Interactive retention: In this state, data is available for monitoring, troubleshooting, and near-real-time analytics.
Long-term retention: In this low-cost state, data isn't available for table plan features, but can be accessed through search jobs.

This article explains how Log Analytics workspaces retain data and how to manage the data retention of tables in your workspace.

Interactive, long-term, and total retention

By default, all tables in a Log Analytics workspace retain data for 30 days, except for log tables with 90-day default retention. During this period - the interactive retention period - you can retrieve the data from the table through queries, and the data is available for visualizations, alerts, and other features and services, based on the table plan.

You can extend the interactive retention period of tables with the Analytics plan to up to two years. The Basic and Auxiliary plans have a fixed interactive retention period of 30 days.

Note

You can reduce the interactive retention period of Analytics tables to as little as four days using the API or CLI. However, since 31 days of interactive retention are included in the ingestion price, lowering the retention period below 31 days doesn't reduce costs.

To retain data in the same table beyond the interactive retention period, extend the table's total retention to up to 12 years. At the end of the interactive retention period, the data stays in the table for the remainder of the total retention period you configure. During this period - the long-term retention period - run a search job to retrieve the specific data you need from the table and make it available for interactive queries in a search results table.

How retention modifications work

When you shorten a table's total retention, Azure Monitor Logs waits 30 days before removing the data, so you can revert the change and avoid data loss if you made an error in configuration.

When you increase total retention, the new retention period applies to all data that was already ingested into the table and wasn't yet removed.

When you change the long-term retention settings of a table with existing data, the change takes effect immediately.

Example:

You have an existing Analytics table with 180 days of interactive retention and no long-term retention.
You change the interactive retention to 90 days without changing the total retention period of 180 days.
Azure Monitor automatically treats the remaining 90 days of total retention as low-cost, long-term retention, so that data that's 90-180 days old isn't lost.

Permissions required

Action	Permissions required
Configure default interactive retention for Analytics tables in a Log Analytics workspace	`Microsoft.OperationalInsights/workspaces/write` and `microsoft.operationalinsights/workspaces/tables/write` permissions to the Log Analytics workspace, as provided by the Log Analytics Contributor built-in role, for example
Get retention setting by table for a Log Analytics workspace	`Microsoft.OperationalInsights/workspaces/tables/read` permissions to the Log Analytics workspace, as provided by the Log Analytics Reader built-in role, for example

Configure the default interactive retention period of Analytics tables

The default interactive retention period of all tables in a Log Analytics workspace is 30 days. You can change the default interactive period of Analytics tables to up to two years by modifying the workspace-level data retention setting. Basic and Auxiliary tables have a fixed interactive retention period of 30 days.

Changing the default workspace-level data retention setting automatically affects all Analytics tables to which the default setting still applies in your workspace. If you've already changed the interactive retention of a particular table, that table isn't affected when you change the workspace default data retention setting.

Important

Workspaces with 30-day retention might keep data for 31 days. If you need to retain data for 30 days only to comply with a privacy policy, configure the default workspace retention to 30 days using the API and update the immediatePurgeDataOn30Days workspace property to true. This operation is currently only supported using the Workspaces - Update API.

To set the default interactive retention period of Analytics tables within a Log Analytics workspace:

From the Log Analytics workspaces menu in the Azure portal, select your workspace.
Select Usage and estimated costs in the left pane.
Select Data Retention at the top of the page.
Move the slider to increase or decrease the number of days, and then select OK.

To set the default interactive retention period of Analytics tables within a Log Analytics workspace, call the Workspaces - Create Or Update API:

PATCH https://management.azure.com/subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.OperationalInsights/workspaces/{workspaceName}?api-version=2023-09-01

Request body

The request body includes the values in the following table.

Name	Type	Description
`properties.retentionInDays`	integer	The workspace data retention in days. Allowed values are per pricing plan. See pricing tiers documentation for details.
`location`	string	The geo-location of the resource.
`immediatePurgeDataOn30Days`	boolean	Flag that indicates whether data is immediately removed after 30 days and is nonrecoverable. Applicable only when workspace retention is set to 30 days.

Example

This example sets the workspace's retention to the workspace default of 30 days and ensures that data is immediately removed after 30 days and is nonrecoverable.

Request

PATCH https://management.azure.com/subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.OperationalInsights/workspaces/{workspaceName}?api-version=2023-09-01

{
  "properties": {
    "retentionInDays": 30,
    "features": {"immediatePurgeDataOn30Days": true}
    },
"location": "australiasoutheast"
}

**Response**

Status code: 200

```http
{
  "properties": {
    ...
    "retentionInDays": 30,
    "features": {
      "legacy": 0,
      "searchVersion": 1,
      "immediatePurgeDataOn30Days": true,
      ...
    },
    ...

To set the default interactive retention period of Analytics tables within a Log Analytics workspace, run the az monitor log-analytics workspace update command and pass the --retention-time parameter.

This example sets the table's interactive retention to 30 days:

az monitor log-analytics workspace update --resource-group myresourcegroup --retention-time 30 --workspace-name myworkspace

Use the Set-AzOperationalInsightsWorkspace cmdlet to set the default interactive retention period of Analytics tables within a Log Analytics workspace. This example sets the default interactive retention period to 30 days:

Set-AzOperationalInsightsWorkspace -ResourceGroupName "myResourceGroup" -Name "MyWorkspace" -RetentionInDays 30

Configure table-level retention

By default, all tables with the Analytics data plan inherit the Log Analytics workspace's default interactive retention setting and have no long-term retention. You can increase the interactive retention period of Analytics tables to up to 730 days at an extra cost.

To add long-term retention to a table with any data plan, set total retention to up to 12 years (4,383 days).

Note

Currently, you can set total retention to up to 12 years through the Azure portal and API. CLI and PowerShell are limited to seven years; support for 12 years will follow.

To modify the retention setting for a table in the Azure portal:

From the Log Analytics workspaces menu, select Tables.

The Tables screen lists all the tables in the workspace.
Select the context menu for the table you want to configure and select Manage table.
Configure the interactive retention and total retention settings in the Data retention settings section of the table configuration screen.

To modify the retention setting for a table, call the Tables - Update API:

PATCH https://management.azure.com/subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.OperationalInsights/workspaces/{workspaceName}/tables/{tableName}?api-version=2022-10-01

You can use either PUT or PATCH, with the following difference:

The PUT API sets retentionInDays and totalRetentionInDays to the default value if you don't set non-null values.
The PATCH API doesn't change the retentionInDays or totalRetentionInDays values if you don't specify values.

Request body

The request body includes the values in the following table.

Name	Type	Description
properties.retentionInDays	integer	The table's data retention in days. This value can be between 4 and 730. Setting this property to null applies the workspace retention period. For a Basic and Auxiliary Logs table, the value is always 30.
properties.totalRetentionInDays	integer	The table's total data retention including long-term retention. This value can be between 4 and 730; or 1095, 1460, 1826, 2191, 2556, 2922, 3288, 3653, 4018, or 4383. Set this property to null if you don't want long-term retention.

Example

This example sets the table's interactive retention to the workspace default of 30 days, and the total retention to two years, which means that the long-term retention period is 23 months.

Request

PATCH https://management.azure.com/subscriptions/00000000-0000-0000-0000-00000000000/resourcegroups/testRG/providers/Microsoft.OperationalInsights/workspaces/testWS/tables/CustomLog_CL?api-version=2022-10-01

Request body

{
    "properties": {
        "retentionInDays": null,
        "totalRetentionInDays": 730
    }
}

Response

Status code: 200

{
    "properties": {
        "retentionInDays": 30,
        "totalRetentionInDays": 730,
        "archiveRetentionInDays": 700,
        ...        
    },
   ...
}

To modify a table's retention settings, run the az monitor log-analytics workspace table update command and pass the --retention-time and --total-retention-time parameters.

This example sets the table's interactive retention to 30 days, and the total retention to two years, which means that the long-term retention period is 23 months:

az monitor log-analytics workspace table update --subscription ContosoSID --resource-group ContosoRG --workspace-name ContosoWorkspace --name AzureMetrics --retention-time 30 --total-retention-time 730

To reapply the workspace's default interactive retention value to the table and reset its total retention to 0, run the az monitor log-analytics workspace table update command with the --retention-time and --total-retention-time parameters set to -1.

For example:

az monitor log-analytics workspace table update --subscription ContosoSID --resource-group ContosoRG --workspace-name ContosoWorkspace --name Syslog --retention-time -1 --total-retention-time -1

Use the Update-AzOperationalInsightsTable cmdlet to modify a table's retention settings. This example sets the table's interactive retention to 30 days, and the total retention to two years, which means that the long-term retention period is 23 months:

Update-AzOperationalInsightsTable -ResourceGroupName ContosoRG -WorkspaceName ContosoWorkspace -TableName AzureMetrics -RetentionInDays 30 -TotalRetentionInDays 730

To reapply the workspace's default interactive retention value to the table and reset its total retention to 0, run the Update-AzOperationalInsightsTable cmdlet with the -RetentionInDays and -TotalRetentionInDays parameters set to -1.

For example:

Update-AzOperationalInsightsTable -ResourceGroupName ContosoRG -WorkspaceName ContosoWorkspace -TableName Syslog -RetentionInDays -1 -TotalRetentionInDays -1

Use this sample ARM template and parameter file to update the retention period for a specific table.

Template file

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentTemplate.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "workspaceName": {
      "type": "string",
      "defaultValue": "sampleWorkspace",
      "metadata": {
        "description": "The number of days to retain the data."
      }
    },
    "tableName": {
      "type": "string",
      "defaultValue": "sampleTable",
      "metadata": {
        "description": "The name of the Log Analytics table to modify."
      }
    },
    "retentionInDays": {
      "type": "int",
      "defaultValue": 30,
      "metadata": {
        "description": "The number of days to retain the data."
      }
    }
  },
  "resources": [
    {
      "type": "Microsoft.OperationalInsights/workspaces",
      "apiVersion": "2025-02-01",
      "name": "[parameters('workspaceName')]",
      "location": "[resourceGroup().location]",
      "resources": [
        {
          "type": "Microsoft.OperationalInsights/workspaces/tables",
          "apiVersion": "2025-02-01",
          "name": "[concat(parameters('workspaceName'), '/', parameters('tableName'))]",
          "properties": {
            "retentionInDays": "[parameters('retentionInDays')]"
          },
          "dependsOn": [ "[resourceId('Microsoft.OperationalInsights/workspaces/', parameters('workspaceName'))]" ]
        }
      ]
    }
  ]
}

Parameter file

{
  "$schema": "https://schema.management.azure.com/schemas/2019-08-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "workspaceName": {
      "value": "MyWorkspace"
    },
    "tableName": {
      "value": "AppRequests"
    },
    "retentionInDays": {
      "value": 120
    }
  }
}

Get retention settings by table

To view a table's retention settings in the Azure portal, from the Log Analytics workspaces menu, select Tables.

The Tables screen shows the interactive retention and total retention periods for all the tables in the workspace.

To get the retention setting of a particular table (in this example, SecurityEvent), call the Tables - Get API:

GET /subscriptions/00000000-0000-0000-0000-00000000000/resourceGroups/MyResourceGroupName/providers/Microsoft.OperationalInsights/workspaces/MyWorkspaceName/Tables/SecurityEvent?api-version=2022-10-01

To get all table-level retention settings in your workspace, don't set a table name.

For example:

GET /subscriptions/00000000-0000-0000-0000-00000000000/resourceGroups/MyResourceGroupName/providers/Microsoft.OperationalInsights/workspaces/MyWorkspaceName/Tables?api-version=2022-10-01

To get the retention setting of a particular table, run the az monitor log-analytics workspace table show command.

For example:

az monitor log-analytics workspace table show --subscription ContosoSID --resource-group ContosoRG --workspace-name ContosoWorkspace --name SecurityEvent

To get the retention setting of a particular table, run the Get-AzOperationalInsightsTable cmdlet.

For example:

Get-AzOperationalInsightsTable -ResourceGroupName ContosoRG -WorkspaceName ContosoWorkspace -tableName SecurityEvent

What happens to data when you delete a table in a Log Analytics workspace?

A Log Analytics workspace can contain several types of tables. What happens when you delete the table is different for each:

Table type	Data retention	Recommendations
Azure table	An Azure table holds logs from an Azure resource or data required by an Azure service or solution and can't be deleted. When you stop streaming data from the resource, service, or solution, data remains in the workspace until the end of the retention period defined for the table.	To minimize charges, set table-level retention to four days before you stop streaming logs to the table.
Custom log table (`table_CL`)	Soft deletes the table until the end of the table-level retention or default workspace retention period. During the soft delete period, you continue to pay for data retention and can recreate the table and access the data by setting up a table with the same name and schema. Fourteen days after you delete a custom table, Azure Monitor removes the table-level retention configuration and applies the default workspace retention.	To minimize charges, set table-level retention to four days before you delete the table.
Search results table (`table_SRCH`)	Deletes the table and data immediately and permanently.
Restored table `(table_RST`)	Deletes the hot cache provisioned for the restore, but source table data isn't deleted.

Log tables with 90-day default retention

By default, the Usage and AzureActivity tables keep data for at least 90 days at no charge. When you increase the workspace retention to more than 90 days, you also increase the retention of these tables. These tables are also free from data ingestion charges.

Tables related to Application Insights resources also keep data for 90 days at no charge. You can adjust the retention of each of these tables individually:

AppAvailabilityResults
AppBrowserTimings
AppDependencies
AppExceptions
AppEvents
AppMetrics
AppPageViews
AppPerformanceCounters
AppRequests
AppSystemEvents
AppTraces

Pricing model

The charge for adding interactive retention and long-term retention is calculated based on the volume of data you retain, in GB, and the number or days for which you retain the data. Log data that has _IsBillable == false isn't subject to ingestion or retention charges.

For more information, see Azure Monitor pricing.

Next steps

Learn more about:

Share via

Manage data retention in a Log Analytics workspace

Interactive, long-term, and total retention

How retention modifications work

Permissions required

Configure the default interactive retention period of Analytics tables

Configure table-level retention

Get retention settings by table

What happens to data when you delete a table in a Log Analytics workspace?

Log tables with 90-day default retention

Pricing model

Next steps

Feedback

Additional resources